Scan qrcode to view mobile website
Mesh Office Chair with Headrest Features :
1) Mid back design with nylon support,fire-resistant ,eco friendly and recycle
2)Imported high elastic mesh ,breathable ,easy to clean,fire-resistant
3) PU casters,durable and move without noise
4)Aluminum alloy connections
5)Headrest height&angle adjustment
6)Backrest height adjustment
7)Arm pad height &angle adjustment
8)Tilt tension&tilt lock
9)Seat height adjustment
Ergonomic Grey Mesh Office Chair with Headrest
66W x55D x118H cm
Nylon frame, Mesh back,mesh seat filled with foam,Five star nylon base with nylon casters.15cm gas lift
Functional mechanism,adjustable seat height and tilt tension
Black,white ,Gray,Navy,Suncast Bule,Teal,etc
CKD ,inner PE foam ,5 Layer Brown Paper Cartons
93x60x43cm;2pcs per carton
7-15 working days
Shipping days(by sea):
around 28 days
T/T,L/C,WesternUnion,MoneyGram,Escrow;30% deposite before production,70% balance before shipment .
All the color are available ,single layer for back ,double layer for seating .
Step 1 Attach casters and gas lift to base .
1)There are five casters that fit into the base of the chair. It takes a bit of pressure to pop them into place. Be careful not to pinch your hand if the wheels move.
2)The gas lift just sets right into the top side of the base, simple as pie.
Step 2 Attach seat plate and armrest to seat.
1)You take the seat plate and line up the holes on the underside of the seat, and screw in four (4) bolts. Both the seat bottom and the seat plate are marked with FRONT, so just make sure they match.
2)Attach the right armrest — which is the more difficult side, for the tilt mechanism is slightly in the way — with three (3) bolts.
3)Next, attach the left armrest, also with three (3) bolts.
Step3 Attach seat back to seat bottom
The backrest is attached with four (4) bolts, two directly into the seat and the other two through the seat plate and then into the seat.
Office Furniture & School Furniture Factory directly Sale (10645) All rights reserved